Factory direct price olive oil horizontal decanter centrifuge quick delivery

The drum material is 316L, (or 2205) and is made by centrifugal casting process. The inner surface of the drum is equipped with longitudinal wear-resistant strips, the material is SAF2205, this structure can effectively prevent the inner wall of the drum wear, increase the service life of the drum, and this structure is more conducive to solid phase discharge. The solid discharge port at the small end of the drum is inlaid with a replaceable high wear-resistant ceramic bushing to prevent the wear of solid materials on the slag outlet of the drum and improve the service life of the drum. The design of the drum uses finite element simulation and optimization design, and fully considers the key parameters such as the strength and vibration of the structure, so that the design can be optimized theoretically. The factory dynamic balance accuracy is G2.5.

The screw (discharger) is made of 316L stainless steel, the cone end of the blade is inlaid with cemented carbide, and the rest is sprayed with cemented carbide. All spiral blades are installed and welded by hot pressing, which ensures the precision and strength requirements of spiral production. The top of the screw feeding chamber adopts a conical structure design to reduce the rebound after the impact of the material, improve the processing capacity, and avoid the phenomenon of plugging in the screw and feeding pipe. The screw also needs to undergo solution treatment and stress relief heat treatment to ensure its strength and aging strain stability. The factory dynamic balance accuracy is G2.5.

Specification