 |
| Quantity: | |
|---|---|
GQ
Shenzhou
All-rounders for mechanical solid-liquid separation with continuous feeding and manual solids discharge.
High-Speed Tubular Centrifuges are mainly used to separate smallest particles from fermenter suspensions. Suspension is fed into the rotor from below while the centrifuge is running. The components of the suspension are stratified in the rotor according to their density. While the liquid is continuously discharged via the discharge trays, the solid remains in the rotor and is harvested manually.
This centrifuge is currently available as a basic machine in a cast housing, in a GMP-compliant stainless steel version ( as an explosion-proof version, also in stainless steel and in a CIP version.
This type of centrifuge can also be installed in a trailer e.g. for water testing, which can be used anywhere. We are happy to support you in planning the trailer using our centrifuge.
Tubular centrifuges - used but completely refurbished with new controller and guarantee can be found at the shenzhou
The tubular centrifuges belong to the high speed sedimentation centrifuges and, with respect to the inflow and outflow of the liquids; and with respect to the discharge of the solid material spun off in the drum, however operate discontinuously. That is to say the solid material must be removed manually.
The tubular centrifuge has a cylindrical tubelike drum, usually with a relatively small diameter. Due to the high-strength material of the centrifuge drum and because of the small diameter of the drum, tubular centrifuges can achieve very high rotational speeds.
The tubular centrifuge’s drum can be designed for purifying a suspension (solid-fluid separation) of for separating a liquid mixture (fluid-fluid separation). Hereby the fluids may not be soluble in each other and must have different densities.
The liquid (suspension or liquid mixture) is, as a rule, fed in at the bottom, rises in the drum and leaves the upper end of the drum purified (for a suspension) or separated (in the case of a liquid mixture.
The centrifugal effect (depending on the diameter of the drum) can be up to 20,000g.
The possible areas of use are widespread. Tubular centrifuges are used, for example, in the paint and colour industry, in the cooking oil, grease and soap industry, in the chemical pharmaceutical industry, in the waxwear industry etc. A specially cooled version of the tubular centrifuge can also be used for the fractionation of human blood.
Technical Parameter:
All-rounders for mechanical solid-liquid separation with continuous feeding and manual solids discharge.
High-Speed Tubular Centrifuges are mainly used to separate smallest particles from fermenter suspensions. Suspension is fed into the rotor from below while the centrifuge is running. The components of the suspension are stratified in the rotor according to their density. While the liquid is continuously discharged via the discharge trays, the solid remains in the rotor and is harvested manually.
This centrifuge is currently available as a basic machine in a cast housing, in a GMP-compliant stainless steel version ( as an explosion-proof version, also in stainless steel and in a CIP version.
This type of centrifuge can also be installed in a trailer e.g. for water testing, which can be used anywhere. We are happy to support you in planning the trailer using our centrifuge.
Tubular centrifuges - used but completely refurbished with new controller and guarantee can be found at the shenzhou
The tubular centrifuges belong to the high speed sedimentation centrifuges and, with respect to the inflow and outflow of the liquids; and with respect to the discharge of the solid material spun off in the drum, however operate discontinuously. That is to say the solid material must be removed manually.
The tubular centrifuge has a cylindrical tubelike drum, usually with a relatively small diameter. Due to the high-strength material of the centrifuge drum and because of the small diameter of the drum, tubular centrifuges can achieve very high rotational speeds.
The tubular centrifuge’s drum can be designed for purifying a suspension (solid-fluid separation) of for separating a liquid mixture (fluid-fluid separation). Hereby the fluids may not be soluble in each other and must have different densities.
The liquid (suspension or liquid mixture) is, as a rule, fed in at the bottom, rises in the drum and leaves the upper end of the drum purified (for a suspension) or separated (in the case of a liquid mixture.
The centrifugal effect (depending on the diameter of the drum) can be up to 20,000g.
The possible areas of use are widespread. Tubular centrifuges are used, for example, in the paint and colour industry, in the cooking oil, grease and soap industry, in the chemical pharmaceutical industry, in the waxwear industry etc. A specially cooled version of the tubular centrifuge can also be used for the fractionation of human blood.
Technical Parameter:
